If you're upgrading from an older version such as VAG-COM version 311 or 409, you will need a new activation. Clicking on the Download Now. Download.com cannot completely ensure the security of the software hosted on third-party sites. USB KKL Interface read more +. VAG KKL USB 409.1 Fiat Ecu Scan KKL Switch Fiat ALFA Note: These instructions are only to be used in case the automatic driver installation is not successful. These instructions are for Windows XP.
The shareware version of Ross-Tech's VAG-COM package - version 409.1 - was written in 2004, and so was never designed to work with Windows 7.Ross-Tech have since released VCDS-Lite, which is compatible with Windows Vista / 7, and so is a better option.
However, should you still wish to use VAG-COM 409.1, it can be made to do so if installed correctly, using the steps below.
| VW Audi Seat Skoda USB Interface for VAG-COM 409.1 or VCDS Lite - most VAG 1996-2003 |
Stage 1: Install the USB drivers for the interface
To get your interface up and running, you need to install software device drivers for the USB interface.
If you are installing the package on a PC that is connected to the internet, Windows 7 can automatically locate and install suitable drivers via Windows Update.
Just connect the interface to a USB port on the computer - Windows will then show a notification that it is locating and installing device drivers...
...and then another message when the installation is complete...
If the PC you are installing on is not connected to the internet, you will need to download the drivers via another PC and install them before connecting the interface. Windows 7 compatible drivers are available here:
Once the drivers are installed, you need to determine which COM port has been assigned to the interface by Windows. To do this you need to go into the Windows Device Manager.
Find the 'Computer' link on the desktop or the Start Menu, click the Right Mouse Button on it and choose Properties:
When the 'System' box appears, click on the Device Manager link on the left hand side:
Then when the Device Manager window appears, click on the arrow next to 'Ports (COM & LPT)' to see which COM port has been assigned to your interface - it will show as a 'USB Serial Port':
VAG-COM 409.1 can only connect to a COM port between COM1 and COM4.
- If the port number assigned to your interface is between 1 and 4, remember which port it's on, then skip to stage 3 - installing VAG-COM.
- If the port number assigned to your interface is higher than 4 (in the example above it is COM8), then you will need to change the port number.
To do this, double-click on the USB Serial Port to go into its properties, then click on the Port Settings tab:
Then click on the 'Advanced' button - this will show you a list of all the COM port numbers you could assign to the interface. Select a port number between 1 and 4 then press ok (if possible choose one that is not shown as 'in use'):
Once that is done, click ok until you are back to the Windows desktop.
Stage 3: Download and install the VAG-COM Software
Next you need to download VAG-COM 409.1 from the Ross-Tech website:
www.ross-tech.com/vag-com/download/archives.html
(Use the link for version 409.1 - shown as 'For MODERN SERIAL Interfaces')
Save the file to your computer, then run it.
When installing VAG-COM on Windows 7, it is important that you do NOT install it within the 'Program Files' folder. Windows 7 protects this folder and prevents programs from writing files into it, which would prevent VAG-COM from working.
So when you see the screen showing the location for installation, change it to another folder, e.g. C:Ross-TechVAG-COM:
Once you have changed the installation location, click install, and wait for it to complete installation. The installer may not give a confirmation window - it may just disappear when it is finished.
Stage 4: Configure the VAG-COM softwareFinally there are a few changes you need to make to get the software up and running.
VAG-COM requires administrator access to function, so find the shortcut to 'VAG-COM Release 409-1', click the Right Mouse Button on it, and choose Properties.
Then on the Properties page, select the 'Compatibility' tab, and tick the option marked 'Run this program as an administrator':
Kkl 409.1 Download Windows 10
Click on 'Apply', then 'OK'.
You may need to repeat this for the shortcut on the Start Menu.
That should be all the preparation done. The final step is to open the VAG-COM software by that shortcut, go into the Options page, then select the COM port your interface is configured on:
Once you've selected the port, click Test, then OK. You should now be able to use the software.
Unexpectedly, I find this post in mhhauto forum, on 09-19-2014 one poster said he found this on the Russian forum, looks good therefore share with others, he wrote down the whole procedure of Toyota Techstream on VAG K+CAN Commander 1.4 or VAG KKL 409.1, share Techstream V9.10.037 and V9.30.029 software download link, as well as Vag k+can commander info.pdf.
On 12-06-2014, he received the first user’s options saying “working perfect i tested on both cables”.
On 12-06-2014, another user replied “I also was able to test the device on HDj10 Toyota Land Cruiser 2004 Toyota Avensis II 2006. Everything works perfectly. I am excited about the possibilities of China Vag K + Can Commander 1.4.”
Kkl 409.1 Driver Download
I post this user’s complete post in the following parts, please more users check.
Toyota Techstream on VAG K+CAN Commander 1.4 or VAG KKL 409.1
Installing Techstream
1 Install the program Toyota TechStream, running the file Techstream_Setup_V9.10.037.exe.
2 File C:Program FilesToyota DiagnosticTechstreamEnvIT3System.ini open notepad, find
; ;
; Available Function Setting
; ;
[AvailableFunction]
MinorFunction = 1
TISFunction = 1
UserFunction = 1
and change TISFunction = 0. This parameter is included with the program mode without technical support official the
techstrima site.
Installing the adapter K-Line (For example VAG-COM 409.1) or VAG K + CAN Commander 1.4
1 For TechStream adapter KLine (eg VAG-COM) or VAG K + CAN Commander 1.4, you must install the driver USB-COM, from the adapter. Usually, it comes with a disk for the adapter.
2 Copy the folder J2534KCANv1.0.0.9 of the archive in the folder C: Program FilesToyota DiagnosticsTechstream.
3 Next, go to the copied folder and run the file j2534KCAN.exe.
4 In the settings, select the COM-port adapter and type – KLine or VAG K + CAN, and then click “Save” and “Exit”.
5 Run TechStream, in Setup-> VIM Select select “J2534 (04.04) K + CAN Driver”.
6 We use
P.S. According to the latest works with chip FT232BQ, FT232RL (such as a trowel or similar). Must also earn an iron com-port adapter and COM-KLine. Adapters chip FT232 is useful to reduce in the driver com port reception with 16ms delay (the default) to 10ms. Other adapters K-Line have not been tested and therefore may be a problem with them.
With some units may be connection problems. Then you must select the settings dTiniL / dTiniH – that is adjusted Fast-pulse. Adjusting the max + -5ms (usually -). Adjusting the settings made ??in the configuration of my driver (j2534KCAN.exe).
For CAN protocol ISO-15765 is possible to adjust the parameters STmin and BS using settings dSTmin and dBS in the configurator. Adjustment is required if there are problems in the exchange of this protocol.
Important zamemchanie!
If you are using Chinese adapters based on the chip FTDI (eg adapter K + CAN Commander 1.4 for this chip)
I recommend to install the driver from the folder J2534KCANv1.0.0.9. The latest official drivers
with the majority of Chinese FTDI chips do not work!
And you can download the newest Toyota TIS Techstream Here:
Installing the adapter Mini-VCI (This archive contains all existing versions of drivers for this adapter)
1 For TechStream adapter Mini-VCI (aka Mongoose, Mangoose and so in general from China) to a folder from the archive MiniVCI
unzip it to drive C.
2 sticks adapter into an available USB slot and install the drivers on the request specify the path C: MiniVCI? TDI.
3 After installing the drivers USB-COM (p. above), you must run the setup.exe file in the folder C: MiniVCI and select one of the
Passthru drivers and click “Select”.
4 Start TechStream, in Setup-> VIM Select select “XHorce – MVCI”.
Vcds 409.1 Kkl Software
5 When it is necessary, you can change the version of the driver directly in Passthru Toyota TIS TechStream in paragraph VIM clicking the “Detail”.
Vag Kkl 409.1 Driver Download Win7
Files from mongose and mini vci/ mvci32.dll detect a virus the mida but I’m not sure if this is definitely a virus. Please bear with us.
Vag Com Kkl 409.1 Cable
More information about pls visit MINI VCI for Toyota TIS Techstream
Save